Victorian Garden Lamp Post 3.25m With LED Lantern Fitting

Out of stock
SKU
ELLF1002 + LF1075 LED

About Item

August Offer - Free mainland UK delivery!

A faithful reproduction of the traditional Victorian gas lamps from the late 1800's, our 3.25m lamp post is complete with all of the original design features from the lantern spinning to cast iron ladder bars.

This specialist lamp post has been pre-fitted with a powerful LED lighting panel which is available in three different brightness outputs. The LED allows the lantern top to emit a brighter and cleaner light, making it perfect for a modern, yet classical security fitting.

The lamp post is also very simple to install. The solid iron base features 4 pre-cast anchoring points to allow for a quick and easy fitting to a concrete or stone foundation.

The lantern is IPX4.

Supplied in ‘Signal Black’ Base Paint Finish - RAL 9004

IP rated LED fittings are available by special request where required and will be quoted for separately.

To be installed, tested and certified by a qualified tradesperson, your tradesperson may make product adaptations where required.

Dimensions (approximate):
Height: 3.25m (10ft 8")
Diameter: 90mm
Post base: 260mm square
Weight: 58kgs

Inspection Chamber Sizes:
Total internal height 53cm
Width at bottom 18cm
Width at top 10cm

Dimensions & Technical Specification

Ever wondered how close or far apart you need to set your Victorian lamp posts?

Below you will find a very useful table that provides a wealth of information on the light output that each strength of LED board will give.

On the left-hand side of the table (highlighted in yellow), you will see the lux level. Lux is simply just a unit of illuminance or luminous emittance, it is equal to one lumen per square metre. An approximate lux of between 20 - 50 is equal to that of a lit up public area on a dark night.

The figures in the centre of the table you will find our recommendations on the actual spacing between each lamp post to achieve each level of Lux. This is split up between the 3 different strength of LED board.

* Please Note: All of these are based on approximations so are only to be used as a guideline and not as an installation template. If you need any additional help and would like to discuss your requirements please contact us for more information.

Garden Lamp Post Spacing Table

Lamp Post Spacing

For information on installing your lamp post click here.

For information on caring for your lamp post click here.

Product Questions

Customer Questions
No Questions
Did you find what you were looking for?